You must be logged in to reply.

Page 1 of 3 out of 26 messages.

How to deploy TinyCLR to FEZ Raptor and porting the Gadgeteer modules drivers to TinyCLR

13 likes
Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
Hello friends,,

In this video I will show you how to deploy TinyCLR to the Fez Raptor.

https://youtu.be/Kxkmrq1niDs


please join me to port all of gadgeteer modules drivers to TinyCLR, I have setup the code repository in https://github.com/Gravicode/GadgeteerToTinyCLR , this project will be dedicated to the .NET gadgeteer fans Wink
Reply #1 — Posted 1yr ago
by Gus_ghielectroncs | Employee
Reply #1 — Posted 1yr ago
by Gus_ghielectroncs | Employee
Great. Glad to see Gadgeteer working with VS2017, thanks to TinyCLR OS Smiley
2 likes
Reply #2 — Posted 1yr ago
by Bauland | Master | 6,336 exp
Reply #2 — Posted 1yr ago
by Bauland | Master | 6,336 exp
Some correction to update bootloader.
  • Download G400 bootloader installer (make sure 2016 SDK is install with g400 Tools).
  • Copy
  • G400 Bootloader.2.0.2.bin in G400 bootlader installer directory.
  • Update Bootloader.tcl file with new name: replace booloader.bin with G400 Bootloader.2.0.2.bin.
  • Connect pin 8 on socket 3 to ground. Press reset and after 3 sec remove connection on this pin.
  • Open a command line (for me, it can't work when just launch Flash booloader.bat with double-click on it) and launch .bat file.
  • Wait some minutes until Bootloader complete message appears.
2 likes
Reply #3 — Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
Reply #3 — Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
@Bauland - Thanks for the correction..

More Drivers for Gadgeteer TinyCLR:
Tunes
DisplayT35
LEDStrip
Joystick
--------
Serial Camera L1 - failed.. (need more time)

source code here : https://github.com/Gravicode/GadgeteerToTinyCLR
4 likes
Reply #4 — Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
Reply #4 — Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
More drivers today for Gadgeteer TinyCLR...
-DisplayNHVN (new haven module) - I use Dave touch controller driver for the capacitive touch, thanks mate Wink
-AccelG248 (accelerometer)
-CharacterDisplay
-CurrentACS712
-Gyro
-RotaryH1

source code here : https://github.com/Gravicode/GadgeteerToTinyCLR

Note:
Serial Camera L1 : I need to wait for the next TinyCLR release because there is a few methods/properties that doesn't have an implementation in Serial Communication Class
1 like
Reply #5 — Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
Reply #5 — Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
New drivers....


-PulseOximeter (waiting for serial com. implementation ready)
-Compass
-Motor Driver L298
-Pulse Count
-Moisture

get: https://github.com/Gravicode/GadgeteerToTinyCLR
Reply #6 — Posted 1yr ago
by njbuch | King | 26,158 exp
Reply #6 — Posted 1yr ago
by njbuch | King | 26,158 exp
This reminds me of the request of getting a shared open source repository of drivers somewhere on github, is anyone digging into that? Whistling
5 likes
Reply #7 — Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
Reply #7 — Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
Today's update...

more drivers...
-MaxO (there is a bug when initialize the SPI, please help)
-Xbee Adapter (waiting for serial com. impl. completed)
-Touch C8
-Breakout TB10

get: https://github.com/Gravicode/GadgeteerToTinyCLR
Reply #8 — Posted 1yr ago
by Gus_ghielectroncs | Employee
Reply #8 — Posted 1yr ago
by Gus_ghielectroncs | Employee
@mifmasterz - bug?
Reply #9 — Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
Reply #9 — Posted 1yr ago
by mifmasterz | Senior | 1,822 exp
@Gus - yes, bug in my code, when I try to create spi device from id : 'SPI1'. I have tried spi mode 0 to spi mode 3, I got the same error. suggestion ?

Page 1 of 3 out of 26 messages.

You must be logged in to reply.