You have reached the legacy GHI Electronics, LLC website, for the new website please visit here. For the new forum please visit here.

You must be logged in to reply.

Page 1 of 2 out of 19 messages.

New capacitive touch display options!

11 likes
Posted 2yr ago
by Gary_ghielectroncs | Employee
Posted 2yr ago
by Gary_ghielectroncs | Employee
Today, we are bringing 7 new display options to Gadgeteer and GXP-compatible mainboards. The Display NHVN Module provides an easy way to connect select New Haven displays, either using the gadgeteer sockets, or by using the GXP connections.

The GXP (general expansion port) standard was created by GHI Electronics to standardize the display connection on a 40 pin 0.1" spaced header.

The Display NHVN module is compatible with any Gadgeteer mainboard with RGB sockets and also works with any board with a GXP-compatible connection. The Related Products tab on the product page contains a list of some of the GXP ready devices.

Supported displays:

Please note that the Display NHVN Module will be available for purchase in late October.

Tip: No displays are included with this module. Mouser Electronics stocks both, GHI products and New Haven displays.

Display NHVN Module: https://www.ghielectronics.com/catalog/product/549
New Haven Display: http://www.newhavendisplay.com/
1 like
Reply #1 — Posted 2yr ago
by Designer | King | 24,688 exp
Reply #1 — Posted 2yr ago
by Designer | King | 24,688 exp
Awesome Awesome Awesome.

but I want that G120 in DIP format first Cheesy
Reply #2 — Posted 2yr ago
by Gus_ghielectroncs | Employee
Reply #2 — Posted 2yr ago
by Gus_ghielectroncs | Employee
Rajesh says:

Awesome Awesome Awesome.

but I want that G120 in DIP format first Cheesy

You didn't see that Whistling
Reply #3 — Posted 2yr ago
by Gary_ghielectroncs | Employee
Reply #3 — Posted 2yr ago
by Gary_ghielectroncs | Employee
Rajesh says:

Awesome Awesome Awesome.

but I want that G120 in DIP format first Cheesy

https://www.ghielectronics.com/community/forum/topic?id=21539
Reply #4 — Posted 2yr ago
by Squeebee | Senior | 3,885 exp
Reply #4 — Posted 2yr ago
by Squeebee | Senior | 3,885 exp
Very nice!
Reply #5 — Posted 2yr ago
by Sprigo | Hero | 12,912 exp
Reply #5 — Posted 2yr ago
by Sprigo | Hero | 12,912 exp
Fantastic!!! Clapping Clapping Clapping
2 likes
Reply #6 — Posted 2yr ago
by Dave McLaughlin | Legend | 58,471 exp
Reply #6 — Posted 2yr ago
by Dave McLaughlin | Legend | 58,471 exp
Looks good. The 4.3 is good because you have mounting points but for the 7" you are going to need something to clamp the LCD into place.

Impressed by the price. I did a small run of 15 units on my 7" panel and the cost per board alone was $75 Sad

I was going to offer the extra units for sale but might just hang on to them as I doubt I will be able to sell them Smiley

If anyone if interested in a Front Panel Express design for the 7" which has the cutouts to suit and gives a nice alignment for the display, let me know and I can send you the file. You can modify this to your own size but the cavity on the rear fits the LCD snugly.

Why is there no 5" option?
Reply #7 — Posted 2yr ago
by Gus_ghielectroncs | Employee
Reply #7 — Posted 2yr ago
by Gus_ghielectroncs | Employee
@Dave McLaughlin - I forgot about the mounting option for the 7" display. More on that tomorrow.
Posted 2yr ago
by Diesel Engineer | Junior | 536 exp
Posted 2yr ago
by Diesel Engineer | Junior | 536 exp
Post has been deleted.
Reply #9 — Posted 2yr ago
by Gary_ghielectroncs | Employee
Reply #9 — Posted 2yr ago
by Gary_ghielectroncs | Employee
Gus says:
@Dave McLaughlin - I forgot about the mounting option for the 7" display. More on that tomorrow.

Actually more on that tomorrow, I was busy today... Whistling

Page 1 of 2 out of 19 messages.

You must be logged in to reply.