You have reached the legacy GHI Electronics, LLC website, for the new website please visit here. For the new forum please visit here.

This legacy website will be taken offline at the end of this year. If there is anything that you would like to archive and save for future reference please do so.

HighPower LED


Comments or questions?   Discuss on the forum.
Ships from Austria. Shipping options:
Worldwide shipping. Price depends on destination.
You must be logged in to contact.

This module consists of 3 independent constant current sources.
Using a 'P' socket, its possible to dim each channel separately.
It's mainly used as a driver for 1Watt LEDs.

input voltage range: 6-25V.
Output current: 330mA
Input voltage must be a little bit higher than maximum output voltage.

You have a few 1Watt LEDs. Each of it needs 3V at 330mA.
You power your module with 23V.
So you can power up to 7 LEDs (7 * 3V = 21) per channel!
But it's up to you if you take 1, 2, .... or 7 LEDs. The module provides only the consumed voltage!

Socket type: P
Size: 50mm x 33mm