You have reached the legacy GHI Electronics, LLC website, for the new website please visit here. For the new forum please visit here.

This legacy website will be taken offline at the end of this year. If there is anything that you would like to archive and save for future reference please do so.

Entries tagged with — display

Page 1 of 5 out of 94 entries.

Simple 7 segment display using Image and Bitmaps for GLIDE by Dave McLaughlin

This is a very simple 7 segment display that uses pre-made bitmap images for a seven segment type display. …

Project   |   Apache 2.0   |   Dec. 11, 2015

Ethernet ENC28 and Display N18 Side by Side on Cerberus by RoSchmi

This “Proof of concept” shows the use of two SPI-Modules (Ethernet ENC28 and Display N18) on the Cerberus …

Project   |   Apache 2.0   |   Jul. 19, 2015

Multiputs - Controlling 8 inputs using a 74HC595 and 4 wires by wbsimms

This shows the control of 8 inputs using a single 74HC595 and a #Gadgeteer FEZ Raptor using .NET Micro …

Project   |   Apache 2.0   |   Jan. 17, 2015

Updated HD44780 module driver by iamin

I have fixed all my suggested issues (listed here: …

Project   |   Apache 2.0   |   Jan. 8, 2015

Joystick Ball by wbsimms

This was a fun little exercise for me. For absolutely no reason whatsoever... I wanted to use the …

Project   |   GPL 3.0   |   Dec. 27, 2014

Touch Piano by wbsimms

I created a simple touch piano with my gadgeteer kit. I use a simple piezo speaker attached to an extender …

Project   |   Apache 2.0   |   Dec. 22, 2014

Musical Distance Sensor by wbsimms

I created a musical distance sensor and LED show. Your body now acts as the keyboard using GHI distance …

Project   |   Apache 2.0   |   Dec. 22, 2014

Dimming the Character Display by kirklynk

This a modification of the GHI character display module, it changes the led port from a digital output port …

Snippet   |   Apache 2.0   |   Nov. 17, 2014

Raptor, T43, Load Mod, Switching Digital Inputs by L1256937

This project is the beginning of our automation system to control an industrial hoist. The hoist will lift a …

Project   |   Apache 2.0   |   Nov. 11, 2014

Save and load display T43 calibration to sd card by BlackDogSpark

This is small example on howto save and load T43 touch calibration to sd. The sample has been tested on Fez …

Project   |   Apache 2.0   |   Jun. 5, 2014

Extended display_n18 driver for Gadgeteering (Medusa) by Reinhard Ostermeier

I needed the ability to rotate the N18 display on MedusaMini, so I decided to extend the driver a little …

Project   |   Apache 2.0   |   Jan. 10, 2014

Page 1 of 5 out of 94 entries.